• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Stir & Strain

  • About
  • Recipes
    • Make or Buy
    • Gin
    • Mezcal
    • Rum
    • Tequila
    • Vodka
    • Whiskey
    • Wine
    • Low Rent Cocktail of the Month
  • Gift Guides
  • Cocktail Presets
  • Seasons
    • spring
    • summer
    • Fall
    • winter
  • Supplies

Barrel Aging Cocktails (without a real wood barrel)

February 1, 2014 by elana 9 Comments

Barrel Aging Cocktails // stirandstrain.comScience Magic! The idea of ingredients going into something and coming out weeks later transformed into something else is a culinary world of mystery that intrigues me. When the concept of barrel aging your own cocktails became a trend I was all on board. It was yet one more way I could control and experiment with drinks.

Here in Los Angeles barrel aged cocktails are now familiar faces on menus but that’s where they seem to stay. I guess there isn’t really a consumer market for large barrels of one cocktail.

Wait. There is at MY house.

For some time now I’ve been dying to try barrel aging at home since it seemed like a DIY project that was very hands off. Step 1, booze goes into barrel. Step 2, wait around a bit. Step 3, uncork and enjoy. Pretty easy, right?

I thought so and accepted the challenge from Uncommon Goods* to try out barrel aging on a small scale (meaning without a barrel). Instead a barrel stave is stuck in the jar with the cocktail ingredients. It’s still all an easy to handle project scale. It’s also a cheaper alternative to buying a barrel and needing to explain to Christopher that the hallway closet is now the home of said barrel and nothing else.

The big question now is…. WHAT TO MAKE IN IT??? I could go for a Manhattan or a Negroni but really, I’ve had those barrel aged versions so many times out at bars that there has got to be a better cocktail to age. I’m wavering between a Hanky Panky and a Martinez. Can someone out there help me pick? Would a Martinez get too soft in there, or a Hanky Panky get too.. herbal?

If you all would like to try your hand at some DIY cocktail and boozy projects, Uncommon goods has a bunch of fun sets on their site over here. In the meantime, I’m going to weigh the pros and cons of what to make and if someone has a better idea, I’ll think about that too.

Stay tuned to find out who made it into the barrel the week of February 24th! And if you’re in L.A. I might invite you over for a taste.

 

*Items generously given gratis and appear here because I like them. Uncommon Goods are supporters of independent artisans and place importance on the designer. Got a design you think they might like? Check out their design challenges. For more info on sponsored products, affiliate links, and gifted booze, please visit the About page.

Share this:

  • Click to share on Pinterest (Opens in new window) Pinterest
  • Click to share on Facebook (Opens in new window) Facebook
  • Click to share on X (Opens in new window) X
  • Click to email a link to a friend (Opens in new window) Email
  • Click to print (Opens in new window) Print
  • Click to share on Tumblr (Opens in new window) Tumblr
  • More
  • Click to share on LinkedIn (Opens in new window) LinkedIn
  • Click to share on Reddit (Opens in new window) Reddit

Like this:

Like Loading...

You might also enjoy...

Filed Under: Make It, Notes, Recipes Tagged With: barrel aged, make it

Previous Post: « Adding Aroma to Cocktails: Rosemary Tincture
Next Post: Roses in the Snow »

Reader Interactions

Comments

  1. Andy

    February 3, 2014 at 9:56 am

    Hi, oak chips / staves / shavings work a bit differently than barrels.This is a simplified take as the barrel aging process is very complex but basically – Both expose the liquid to oak and allow for the spicy,bitter,sweet,tannic compounds to be extracted. But barrels are porous which also allows oxidative reactions to occur, which is a larger component to the softening or mellowing that occurs when spirit ages in a barrel. Chips won’t soften things as they don’t allow for evaporation or oxidation effects.

    Chips etc are still useful for providing oak flavoring, but you’ll want to be a bit careful about how much oak you employ. Most of the oak stave & chip products are toasted (rather than the char that is typical for spirit barrels) and designed for the supplemental oaking of wine, so they provide a lot of surface area to increase extraction of the tannic component of oak. For oak cubes, a common usage rate for wine is about 3 gram per liter of wine for a few months. For spirits that rate works too, but the extraction happens a bit quicker because of the increased alcohol content.

    At the small scale (it looks like you are using a 375 ml bottle) things can get over extracted very quickly, so you’ll want to check it every day. If you want to experiment with the impact aging on a stave will have on a cocktail, take a gram or two of the wood and simmer it in a couple ounces of water with the lid on. After it has cooled you’ll have an oak tincture which you can dropped into a cocktail to get a feel for the taste and smell of oak.

    Hope that helps a bit, at the distillery we’ve used everything from chips up to 55 gal barrels and they all have different jobs.

    Reply
    • elana

      February 5, 2014 at 1:31 pm

      This is SUPER helpful. Thanks for taking the time to write here! This is going to help me with adjustments to the recipes.

      Reply
    • Matt

      February 18, 2014 at 7:30 am

      I’m not sure if this is quite equivalent to barrel aging, but I’ve had pretty good results. Instead of capping the bottle I’m oak aging in with oak cubes, I put about 4-5 layers of cheese cloth on top. It allows for some minor evaporation(The angels share), and allows some air in to to oxidize.

      Reply
  2. sippitysup

    February 3, 2014 at 3:13 pm

    I gave something like this a try once as well. It was fun, but a little undependable maybe. Of course you are far more attuned to the details than I so I’ll be interested to your results. GREG

    Reply
  3. Eric

    February 5, 2014 at 6:19 am

    I’ve used this kit for manhattans and negronis. I currently have a batch of old pal sitting in one for this weekend.

    I think hanky panky might work nicely!

    Reply
  4. Eric

    February 5, 2014 at 6:24 am

    Also, check out Tuthilltown Spirits (http://www.tuthilltown.com/) for a direct source for the kits.

    Reply
    • elana

      February 5, 2014 at 1:32 pm

      Thanks so much Eric!!

      Reply
  5. Doug Ford

    February 7, 2014 at 12:43 pm

    I’ve often thought the Toronto would make a good subject for barrelling. I’m looking forward to hearing how your experiment turns out.

    Reply

Trackbacks

  1. And the winner of the barrel aged cocktail choice goes to… // Stir and Strain says:
    February 28, 2014 at 12:25 pm

    […] the first post, I proposed the question to you all, What cocktail should get barrel aged (without a real barrel)? […]

    Reply

Leave a ReplyCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Primary Sidebar

Stay in Touch

  • Bloglovin
  • Facebook
  • Instagram
  • Pinterest
  • RSS
Classic Cocktail Presets // stirandstrain.com

Recent Posts

  • Coming back online // you can’t wear a mask and drink at the same time
  • Home Bar Spring Favorites
  • Monday Booze News A new low-abv drink to try, jello shots for St. Patrick's Day, and getting to know Tennessee whiskey
  • Monday Booze News All about Chartreuse, sleep where your beer is made, and more tiki mugs you'll want to buy!
  • Tequila Cazadores: Cristalino Launch
  • Mixed Citrus Margaritas for Margarita Day Learn to make a squash syrup (no, not the vegetable!)
  • Building a Home Bar: Keeping Cool with the Newair Premiere Line Fridge
  • Monday Booze News Presidents Day Drinking Edition


Copyright © 2025 Stir and Strain .
All rights reserved. Original photography may not be used without prior written permission.
Alcoholic drinks are intended for adult use only. Mind your local drinking laws.

%d